7 1/2 x 10 1/2 (106)
106 Changeover Recipe Template | #Cylinders |
| Notes: | |||||
|---|---|---|---|---|---|---|---|---|
 | Lip Knife | #228 | ||||||
Former | #229 | |||||||
Change Gear | 37 | |||||||
Press Gear | 37 | |||||||
Top plate | 10 1/2” | |||||||
Bottom plate | 10 1/2” | |||||||
Glue Bar | 7 1/2” | |||||||
Tube length | 11.62” | |||||||
Max Colors |
| |||||||
Seam Glue |
| |||||||
Bottom glue |
| |||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
1 | M1 Roll Stand | Edge of shaft body | Roll edge | Tape Measure | 6 5/8” | in |
|
|
2 | M2 Roll Stand | Roll Stand frame | Edge of roll | Tape Measure | 11 1/4” | in |
|
|
| ||||||||
 |  | |||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
3 | R1 Lower Feed Roller - (Operator Side) | Operator side inside frame | Edge of feed roller | Steel ruler | 2 7/8” | in |
| |
4 | R2 Lower Feed Roller – (Power Side) | Hub | Hub | Steel ruler | 3 1/8” | in |
| |
5 | R3 Upper Feed Roller – (Operator Side) | Gear Hub | Edge of feed roller pulling surface | Steel ruler | 2 1/8” | in |
| |
6 | R4 Upper Feed Roller – (Power side) | Pulling surface | Pulling surface | Steel ruler | 3 5/8” | in |
| |
| ||||||||
 |  | |||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
7 | Former Bridge | Frame Edge | Steel ruler | 1/8” | in |
| ||
8 | Former Height | Roller hubs | Steel ruler | 1/16” | in |
| ||
| ||||||||
 |  | |||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
9 | Former | Former Rib | Frame | Steel ruler | 7 5/8” | in |
| |
10 |
| Striker bar | Former teeth | Steel ruler | 1/4” | In |
| |
| ||||||||
 | ||||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
11 | Side plate H.S. Front | Outer edge of Bracket | Outer edge of side plate | Steel Ruler |
| in |
| |
12 | Side Plate H.S. Rear | Outer edge of bracket | Outer edge of side plate | Steel Ruler |
| in |
| |
13 | Side Plate P.S. Front | Outer edge of bracket | Outer edge of Side plate | Steel Ruler |
| in |
| |
14 | Side Plate P.S Rear | Outer edge of bracket | Outer edge of Side plate | Steel Ruler |
| in |
| |
| ||||||||
 | ||||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
15 | Lip knife | Striker bar | Lip knife straight Edge | Steel ruler | 1/8” | in |
| |
16 | Lip knife Height | Lip knife | Former | Steel ruler | 1/8” | In |
| |
17 | Glue Bar |
|
|
| 7 1/2” | In |
| |
| ||||||||
 | ||||||||
Step # | Name | Checked | Tool | Measurement | Units | Additional Notes | ||
18 | Top Plate |
|
|
| 10 1/2” | in |
| |
19 | Bottom Plate |
|
|
| 10 1/2” | in |
| |
20 | Change Gear |
|
|
| 37 |
|
| |
21 | Press Gear | Hub in | Hub out |
| 37 |
|
| |
| ||||||||
 | ||||||||
Step # | Name | Measurement From | Measure To | Tool | Measurement | Units | Additional Notes | |
22 | Seam glue bracket | Seam glue Bracket | Steel ruler | 8 1/4” | in |
| ||
23 | Counter Bracket | Counter bracket cylinder end | Frame | Steel ruler | 2 5/8” | in |
| |
24 | Cylinders |
|
|
|
|
|
| |
Related content
All content posted in our Confluence Spaces, including but not limited to text, images, videos, and audio files, are the exclusive property of Wisconsin Converting Inc. and are protected by U.S. and international copyright laws. Any reproduction, modification, distribution, or replication of our content without prior written permission from Wisconsin Converting Inc. is strictly prohibited.
All rights reserved. Wisconsin Converting Inc. reserves the right to take appropriate legal action against any unauthorized use of our content.