Glue Pot Setup Instructions

2 min
image-20250512-204532.png

 

Operator Standard Work

Operator Standard Work

Work Sequence

Element Description

Steps

Operating Instructions

Visual Depictions

 

Open the Glue Pot Cover

 

Lift the cover towards you to expose the glue roller.

image-20250512-204213.png

 

 

Adjust Glue Thickness

 

Use a rubber mallet to gently tap the brass arms toward you to set your desired glue thickness on the roller.

image-20250512-203301.png

 

 

Loosen Adjustment Lock Bolts

 

Loosen the bolts that lock the adjustment handles in place.

image-20250512-203414.png

 

 

Position the Glue Pot

 

Slowly and evenly turn both adjustment handles counterclockwise. This will move the glue pot toward the glue bar.

image-20250512-204058.png

 

 

 

 

Stop turning as soon as you see glue bar marks on the glue roller.

Important: If the glue pot starts to bounce, it is too far in and is contacting the glue bar. In that case, turn the handles clockwise to back it out slightly and repeat the adjustment process.

image-20250513-113257.png

 

 

Tighten the Adjustment Lock Bolts

 

Once properly positioned, tighten the bolts to secure the setting.

image-20250512-203414.png

 

Run the Machine

 

Bring the machine up to speed and inspect the glue roller for any skipping in the glue bar marks.

 

END

 

Looking for labels? They can now be found in the details panel on the floating action bar.

All content posted in our Confluence Spaces, including but not limited to text, images, videos, and audio files, are the exclusive property of Wisconsin Converting Inc. and are protected by U.S. and international copyright laws. Any reproduction, modification, distribution, or replication of our content without prior written permission from Wisconsin Converting Inc. is strictly prohibited.

All rights reserved. Wisconsin Converting Inc. reserves the right to take appropriate legal action against any unauthorized use of our content.