Installing Change Gear - Step-by-Step Guide
Operator Standard Work | ||||
|---|---|---|---|---|
Work Sequence | Element Description | Steps | Operating Instructions | Visual Depictions |
1 | Installing Change Gear | 1 | Loosen the guard bolts and remove the guard.
|  |
|
| 1a | Remove the nut and washer. | 
|
|
| 1b | Loosen the swing gear bolt and carefully lower the swing gear. Note: machine 101, the swing gear is secured with two bolts. | 
|
|
| 1c | Remove the existing change gear and install the correct one as specified on the setup sheet. |
|
|
| 1d | Reinstall the washer and tighten the nut. |
|
|
| 1e | Carefully mesh the swing gear with the change gear. Important: Do not bottom out the gears. Maintain a slight gap between the pitch circles of the gears to ensure proper meshing. |
|
END | ||||
Related content
All content posted in our Confluence Spaces, including but not limited to text, images, videos, and audio files, are the exclusive property of Wisconsin Converting Inc. and are protected by U.S. and international copyright laws. Any reproduction, modification, distribution, or replication of our content without prior written permission from Wisconsin Converting Inc. is strictly prohibited.
All rights reserved. Wisconsin Converting Inc. reserves the right to take appropriate legal action against any unauthorized use of our content.