Setting up Scale 1

		Operator Standard Work
		Work Center			Job Description
		Production			Setting up Scale
		OSW#		PPE		Tools

Work Sequence	Element Description	Steps	Operating Instructions		Visual Depictions
1	Level Scale	1 1a	Verify the scale is level using the bubble in the lower left hand corner. If the scale is not level adjust the legs on the bottom of the scale to make it level.
2	Power on Scale	2 2a	The power button is located on the bottom, front right hand corner. Press the power button for 3 sec
Note: When Turning on Scale, Scale needs 15 minutes to warm-up before calibrating. Scale needs to be set to Lbs
3	Tare out Carton weight	3 3a	Place an empty carton “that will be required on your current job,” on the scale Press “TARE” button on the panel. This will zero out the weight of the carton.
4	Add Sample Bags	4 4a 4b 4c	Press the “SMPL” (Sample) button Insert the number 10 using the number keys on the panel Place 10 bags into the empty carton on the scale. Press “SMPL” (Sample) button
Note: Add and subtract bags to verify scale is counting bags correctly
END
Title			Issue Date
OSW #			Revision
			Prepared By

Operator Standard Work