200's - Stacking Display Setup
Operator Standard Work | ||||
|---|---|---|---|---|
Work Sequence | Element Description | Steps | Operating Instructions | Visual Depictions |
1 | Locate the Job Traveler | 1 | Find the job traveler. The number of stacks will be listed at the bottom center of the document. |  |
2 | Locate the Controller on the Machine | 2 | Identify the controller mounted on the machine near the conveyor belt. |  |
3 | Set Up the Counter on the Display | 3
| Press the "edit" button on the controller while pointing to the sensor on the display.
|  |
|
| 3a | The first digit on the display will begin flashing. For example, it may show "0." |  |
4 | Enter the Number of Stacks | 4
4a | Input the number of stacks as indicated on the job traveler. For this example, the traveler specifies 110 stacks. Enter "0" followed by "110." |  |
5 | Confirm the Entry | 5 | Press the controller button while pointing at the display to confirm your entry. |  |
Related content
All content posted in our Confluence Spaces, including but not limited to text, images, videos, and audio files, are the exclusive property of Wisconsin Converting Inc. and are protected by U.S. and international copyright laws. Any reproduction, modification, distribution, or replication of our content without prior written permission from Wisconsin Converting Inc. is strictly prohibited.
All rights reserved. Wisconsin Converting Inc. reserves the right to take appropriate legal action against any unauthorized use of our content.