/
Timing in Transfer Rolls

Timing in Transfer Rolls

Feb 23, 2021

Step 1 - Turn the hand wheel until the knife is abut to cut through, but DO NOT make the cut.

Step 2 - Loosen the 1st transfer roller from the slip collar and move it until it starts to grab the patch. At that point tighten it down.

The 1st roller should have enough pressure on it so the patch will not slip, but not so much that it will cause holes or rips in the release paper.

Step 3 -Β  The 2nd roller should have slight pressure on it. The 2nd roller at this point is a helper.

Step 4 -Β  The 3rd roller should grab the patch just as the 1st roller is letting go.Β 

Looking for labels? They can now be found in the details panel on the floating action bar.

Related content

All content posted in our Confluence Spaces, including but not limited to text, images, videos, and audio files, are the exclusive property of Wisconsin Converting Inc. and are protected by U.S. and international copyright laws. Any reproduction, modification, distribution, or replication of our content without prior written permission from Wisconsin Converting Inc. is strictly prohibited.

All rights reserved. Wisconsin Converting Inc. reserves the right to take appropriate legal action against any unauthorized use of our content.